Flashforge Creator Pro
Never available again
View alternatives in the sidebar
View alternatives in the sidebar
According to our 3D printer expert
The Flashforge Creator Pro is a 3D printer for advanced hobbyists. You can print your designed models from an SD card or via a USB cable from your laptop or PC. You can easily design your own models with the Flashforge software, which you then print just as easily with the same software. Control the Creator Pro with the LCD screen. You connect directly to your printer via the built-in WiFi. Do you want to design a soccer ball in black and white? That isn't a problem for the Creator Pro. This 3D printer has 2 nozzles, so you can print with up to 2 colors per design. The storage capacity is expandable up to 8GB.
Supporting types of filament | ABS, CAP, Carbon, Flexible, HIPS, Laywood, Nylon, PLA, PVA, TPC | |
|---|---|---|
Number of printheads (extruders) | 2 | |
Layer height (resolution) | 100 - 500 µm | |
Heated print bed |
5 stars
1
4 stars
1
3 stars
0
2 stars
0
1 star
0
The printer can be used immediately, just screw on the print head with the supplied Allen key. Switching on the heated bed is simple with 3 set screws and a good explanation. 2 rolls of film are included, connect, turn on and print. With the 2 rolls you can print a lot. Most things you will print will need between 4 and 8 meters. And 1 roll contains 330 meters. Enough to print! Buy that trade! Print quality also top btw!
Mario Koevoet
13 January 2021
Automatically translated from Dutch
I am satisfied with the quality. It is a solid device and the print quality is good. Installation was not complicated and did not take long. I was able to get started quickly and the process is not complicated. I soon had good results. I am not satisfied with the connectivity. First off, this device has no WiFi at all. Secondly, connecting via usb doesn't work on windows 10 or macos either. Finally, the device often does not see the SD card, so a reboot is necessary. This also prevents installing new firmware.
tarik
9 March 2021
Automatically translated from Dutch
Product number | 855858 | |
|---|---|---|
Manufacturer code | 258 | |
Brand | Flashforge | |
Warranty | 2 years | |
Processing of your defect | Via Coolblue |
Depth | 36 cm |
|---|---|
Material | Plastic |
Height | 55 cm |
Width | 52,6 cm |
Type of assembly (3D printers) | Assembled | |
|---|---|---|
3D printing method | Fused Filament Fabrication (FFF) | |
Number of printheads (extruders) | 2 | |
Maximum construction width | 148 mm | |
Maximum print height | 150 mm | |
Maximum print length | 227 mm | |
Maximum print volume | 5,04 l | |
Positioning accuracy X axis | 0,011 mm | |
Positioning accuracy Y axis | 0,011 mm | |
Positioning accuracy Z axis | 0,0025 mm | |
Layer height (resolution) | 100 - 500 µm | |
Mouthpiece diameter | 0,4 mm | |
Optional mouthpiece available | ||
Optional mouthpiece diameter | 0,4 mm | |
Heated print bed | ||
Supporting types of filament | ABS, CAP, Carbon, Flexible, HIPS, Laywood, Nylon, PLA, PVA, TPC | |
Diameter | 1,75 cm | |
Memory card | MicroSD, MicroSDHC, MicroSDXC, SD, SDHC, SDXC | |
Includes SD adapter | ||
MicroSD memory card version | MicroSD, MicroSDHC, MicroSDXC | |
SD memory card version | SD, SDHC, SDHC UHS, SDXC, SDXC UHS | |
Memory card reader | ||
Color screen | ||
Touchscreen | ||
Tiltable | ||
Printing without PC/laptop | ||
Built-in screen | ||
Response time | 0 ms | |
Resolution width | 0,2 pixel | |
Resolution height | 0,2 pixel | |
Expandable storage capacity up to | 8 GB | |
Pre-assembled | ||
USB port | ||
Number of USB ports | 1 | |
USB function | Data transfer, Software updates | |
Bluetooth | ||
NFC | ||
Built-in WiFi |