Ferm CDM1127

Name: Ferm CDM1127
Brand: Ferm
SKU: 770028
Price: 139 EUR
Availability: SoldOut
Rating: 9 (10 reviews)

Review is 9,0 out of 10, based on 10 reviews.

Never available again

View alternatives in the sidebar

Product information
Reviews
Specifications

Product information

Pros and cons

According to our impact wrench expert

With a force of 380 Nm you can loosen or tighten each bolt and nut.
Thanks to the power supply via battery you always work completely cordless.
The handy LED lighting shines on the work surface.
If the battery is empty, it takes at least 3 hours before it is fully charged again.

Description

You can easily take the Ferm CDM1127 to the garage, workshop or other places where nuts and bolts have to be tightened properly. The impact wrench works on an 18 volt battery, so you never have to worry about an awkward cord. The maximum torque of 380 Nm makes the CDM1127 extremely powerful and suitable for changing (car) tires or dismantling furniture. Depending on the job you set the speed yourself, up to a maximum of 2300 revolutions per minute. Thanks to the built-in lighting, you also have good visibility in poorly lit areas. The impact wrench is supplied complete in a suitcase and with a 2-piece socket set.

This is what you get

Manual
18 volt 4.0 Ah Li-Ion battery
Battery charger
2-piece socket set
Storage case

Reviews

Rating

5 stars

4 stars

3 stars

2 stars

1 star

Most helpful reviews

Not suitable for car wheel bolts.

Cheap for a force of 380 Nm.
Will not loosen car wheel bolts.

Regularly work on my car, which means that I sometimes have to remove a wheel. Wheel bolts are tightened with a force of 90 to 130 Nm... So for such an impact wrench of 380 Nm it should not be a problem to get it loose. Not so. Tried on three cars, it won't loosen a single bolt. A lot of noise... that is. Device returned. I am considering buying a stronger device. The price is then quickly x 3 or x 4.

Guy Jorissen
7 March 2020
Automatically translated from Dutch

Review is 10 out of 10.

Good

Lots of torque
Fits well in the hand
incl. Pot 19mm and 21mm
No cap of 17mm

Good price due to high power

Dimitri Dhaene
23 December 2017
Automatically translated from Dutch

Review is 8,5 out of 10.

Fully Compliant

not too heavy
good in the hand
price quality
none found yet

The product fully meets the requirements. Also a great storage case.

VALERE THEUNIS
14 March 2018
Automatically translated from Dutch

Specifications

Product

Product
	Product number	770028
	Manufacturer code	CDM1127
	Brand	Ferm
	Warranty	2 years
	Processing of your defect	Via Coolblue

Physical properties

Physical properties
	Weight	2,45 kg
	Brushless motor
	Storage case type	Standard case
	Included by default	Charging dock, Storage case
	Battery charging time	3 hours
	Battery/battery capacity	4 Ah
	Charging dock included
	Battery technology	Lithium-ion
	Battery / battery voltage	18 V

Properties

Properties
	Number of mechanical speed settings	1
	High idle speed	0 - 2300 rpm
	Number of torque settings	1
	Maximum torque of hard screw connection	380 Nm
	Type of drill chuck	1/2-inch square
	Type of DIYer	Occasional handyman
	Power supply type	Rechargeable battery
	Battery/battery capacity	4 Ah
	Battery technology	Lithium-ion
	Battery charging time	3 hours
	Charging dock included
	Number of batteries included	1
	Battery / battery voltage	18 V
	Required battery/battery voltage (device)	18 V
	Required batter/battery technology (device)	Lithium-ion
	Batteries included
	Replaceable battery
	Weight	2,45 kg
	Brushless motor
	Storage case type	Standard case
	Included by default	Charging dock, Storage case