Thanks to the thumbscrew, this monitor arm is suitable for nearly all desks.
Adjust the mount to your ideal working posture.
No loose cables lying around thanks to the cable management system.
The monitor mount isn't continuously adjustable in height.
Description
With the Neomounts FPMA-D550DBLACK Monitor Arm Black, you can save space on your desk. Thanks to the adjustable arm, you can set your monitor to any desired height. You can also swivel, pivot, and tilt the screen to create an ergonomic workplace at home or at work. The monitor arm is suitable for 2 monitors with a size between 10 and 32 inches and can carry a total of 16kg. You can place this mount on almost any desk with the included clamp or via the grommet. Thanks to the rings on the arm, you can neatly hide the cables. This way, you won't be bothered by loose cables on your desk.
it saves a lot of space on your desk and you can also clean/keep it easier.
the mounting went very smoothly (my 1st monitor bracket) vesa monitor plate has 2 different mounting distances. plastic filler cans are even included, so it can almost always be made to fit. I am amazed that such an arm can easily carry 2 large 32" curved monitors from Samsung G5 and that the entire assembly stands like a rock, even though the standard monitor base has problems with that.
the monitors can be placed very neatly and tightly against each other so that a light seam is not or barely visible between the two screens.
you can adjust the support in all directions, turn, tilt, rotate, you name it.
just a good and solid product and why would you pay more for someone else who can do the same?
Review by:
Wouter Griek
Date:
15 January 2021
Translation:
Automatically translated from Dutch
Review is 9,6 out of 10.
9,6/10 ()
Solid, beautiful monitor arm
Sturdy, matte black metal
To be mounted with clamp or through a hole in the desktop
beautiful face
Logo on foot
Nice, sturdy stand where you can hang your monitor with confidence. It stays neatly in the same position but is still easy to move. However, is not cheap compared to the competition elsewhere.
Note that if you have another shelf directly under your desktop: both the clamp and screw mounting require at least about 15 centimeters of free space under the desk. I myself had to cut out a bit before mounting was possible.
In addition, on the base of the whole is a fairly large logo (no sticker or anything like that, really in the metal itself) that is not present in the photos on the website.
Review by:
Engel
Date:
15 March 2019
Translation:
Automatically translated from Dutch
Review is 9,2 out of 10.
9,2/10 ()
Recommended for large and heavier monitors
Can also handle heavier screens
Very solid to attach to the desk
Installation is simple
Supplied allen keys are (too) small
Product general and unboxing -
Product is neatly packaged, and largely pre-assembled. The description that comes with it is simple and easy to follow.
The bracket is neatly matte black in color. There are also clips on the horizontal arms for cable management.
Assembling -
The standard offers two forms of installation; clamps on the desk, and through the desk.
I myself opted for clamps on the desk. The clamp that clamps around the desk can be set in two positions; one for thicker desks and one for thinner desks. I had to put the clamp on the thin position myself, that was a matter of tightening and loosening two screws. The screws, however, were quite tight, and could not be loosened with the supplied keys. After the desk clamp, I attached the arms. These clamp around the standing 'post' and are very firmly attached. My 27" monitors hang easily 18cm from the desk, and could be hung about 5cm higher.
Confirm monitors -
Two vesa brackets are included for the monitors. These brackets come on the mounting points on the back of the monitor. These brackets are securely fastened and there is no play. Tip: when attaching the brackets, I recommend sticking a piece of felt between the monitor and the bracket to prevent any damage. After mounting the vesa brackets, it is a matter of hanging the monitor on the arm. This is a matter of sliding the vesa bracket over the end of the arm and tightening a screw. Couldn't be simpler. The only drawback is that this form of attachment ensures that there is some play between the arm and the bracket. The monitors can therefore 'wobble' a bit. I solved this myself by pasting something in between.
Fine tune -
Adjusting the monitors was very simple. There are plenty of adjustment options and it was easy to match both monitors. My monitors are not the lightest, but hang on these arms just fine.
