How do you solve a Beko washer dryer combination error?

Your Beko washer dryer combination displays one of the following errors:

• The washer dryer combination doesn't drain water
• Your laundry doesn't dry
• The washer dryer combination doesn't get water
• The door doesn't open
• The washer dryer combination makes noise
• The washer dryer combination doesn't start
• Water is leaking from the washer dryer combination

Does the water pool in the drum? Check the drain hose and supply hose first:

1. Check whether there's a kink in the drain hose and remove it.
2. Check the drain hose for clogs and clean them out.
3. Clean the drain filter at the bottom of the washer dryer combination.

Doesn't your laundry get dry? This is often caused by the drying function not being turned on, the drum being too full, or not choosing the right cycle. Check the following:

1. Check whether the drying function is turned on.
2. Check if you've selected a dryer cycle.
3. Take part of the laundry out of the drum if it's too full.
4. Choose a higher spin speed while washing.
5. Make sure the chosen cycle is suitable for the type of laundry.

If no water enters the drum, check the water supply first:

1. Fully open the water faucet.
2. Check whether there's a kink in the supply hose and remove them.
3. Clean the water supply filter.
4. Close the door well until you hear a click.

If the door of your washer dryer combination doesn't open, try the following:

1. Wait until the cycle is completely done.
2. Drain the water with the 'Pump' or 'Spin' cycle.
3. Push against the door and then carefully open it.
4. If the power goes out, open the hatch of the drain filter and pull the emergency handle down.

Does your washer dryer combination make a lot of noise or is it vibrating while washing? Try the following:

1. Check whether the washer dryer combination is level and adjust the leg stands.
2. Clean the drain filter.
3. Check whether the transit bolts have been removed.
4. Evenly distribute the laundry over the drum.
5. Take part of the laundry out of the drum if it's too full.
6. Make sure the washer dryer combination isn't leaning against anything.

If your washer dryer combination doesn't start, this is often caused by the power supply, an open door, or the settings. Check the following:

1. Check whether the plug is in the socket correctly.
2. Close the door well until you hear a click.
3. Take part of the laundry out of the drum if it's too full.

Does water leak from the bottom of your washer dryer combination? Check the drain hose and supply hose:

1. Check whether there's a kink in the drain hose and remove it.
2. Check the drain hose for clogs and clean them out.
3. Clean the drain filter at the bottom of the washer dryer combination.

Don't the solutions work? It may help to take the plug out of the socket for 30 minutes and then restarting the cycle. Doesn't this solve the problem? You might need the help of a technician. If your washer dryer combination is still covered by the warranty, contact the store you bought it from. Has the warranty expired? Contact the Beko customer service.