The most common errors of Haier washer dryer combinations

If you see the E1 error code on the display, something's wrong with the water drain. Thoroughly clean the filter of the appliance. First, put a bucket or tub under the filter cover of the appliance. Open the cover and gently unscrew the filter. While the water runs out of the machine, you can rinse the filter under the faucet. Also clean the filter compartment with a cloth and put the filter back into the appliance.

Error code E4 indicated that the washer dryer combination doesn't get enough water to run a wash cycle. First, check if the faucet is completely opened. Is it? Check if the supply hose is blocked, and clean the hose filter. Close the faucet and remove the supply hose. Gently clean the filter at the end of the hose, and put the hose back in place. Lastly, make sure there are no bend in the supply hose.

Do you see the code E9 on the display of your washer dryer combination? In that case, there's a problem with the temperature sensor in the appliance. Turn the appliance off and unplug the connector from the socket. Contact the customer service of the place where you bought the appliance. That way, a mechanic will help you with the solution.

Didn't the solutions work? You can remove the plug for 30 minutes and restart the cycle. Unfortunately, you can't solve every error yourself. Some error require a mechanic to repair the appliance. Did you buy your washer dryer combination at Coolblue? Does the appliance still fall within the warranty period? Contact our Customer Service. Did the warranty expire? Contact Haier.