How do you fix a Zanussi dryer error?

The door won't close.

1. Check if there's laundry between the door.
2. Put it back in the drum.
3. Close the door until you hear a click.

This indicates electronic issues. Zanussi recommends you call the customer service.

There's an issue with the condensation drain of your dryer.

1. Test if the condensation drain hose is properly attached on both sides.
2. Check if there's a kink or loop in the hose. If so, straighten it.

There's an issue with the humidity sensors of the dryer. Make sure it's plugged into an earthed socket. You can recognize these sockets by the metal pins at the top and bottom.

The temperature sensor has malfunctioned. Zanussi recommends you call a technician.

The dryer doesn't receive any power.

1. Make sure the plug is properly plugged into the socket.
2. Test to see if a different product does work when plugged into this socket.
3. Doesn't the other product work either? That means there's something wrong with the power supply and not with the dryer.
4. Check your fuse box and make sure the right switch is on.

The dryer can't get warm enough.

1. Remove large pieces of dust from the lint trap.
2. Rinse the lint trap under the faucet.
3. Clean it with your fingertips.
4. Dry the lint trap with a clean cloth and put it back.
5. Clean the condenser at the bottom of the dryer.

There's an electronic issue. Zanussi recommends you call the customer service.

It's a good idea to clean the lint trap and the condenser no matter the error message. Pull out the plug as well and put it back in the socket after 30 minutes. Restart the dryer cycle. If the dryer still indicates an error, you might need a technician after all. Contact our customer service if you bought your Zanussi dryer at Coolblue. If that's not the case, you can call the Zanussi customer service.